Pedro Skiron 35 No longer available
Dimensions (m):
10.60 x 3.50 x 1.00
Ref. no.:
170510
Mooring:
Near Gorinchem, Netherlands
Construction year:
2001
Material:
steel
Vision Doeve Brokers
Motor cruiser with aft cabin von Shipyard Pedro Boat. The Pedro 35 is very well maintained. Major investments were made in 2017. For example, the hull is painted with a 2-component system, a Cupa bow thruster installed and the rear deck has been provided with plastic teak. In the front is a V-bed followed by the galley with dinette. From the lounge you have a good view to the outside. The owner's cabin with French bed and bathroom with shower are located in the stern.
More information
General information
Yard: | Yard Pedro boat b.v., NL-Zuidbroek |
Hull shape: | hard chine |
Hull material: | steel |
Deck material: | steel Flexiteek on aftdeck |
Superstructure material: | steel |
Construction method: | aftcabin side-decks stainless steel bollards rubber rubbing strake |
Steering system: | hydraulic wheel |
Windows: | aluminium windows frames |
Displacement (approx.): | 9 ton |
Airdraft (approx.): | everything down 2,50 m |
Registration: | French registered |
Colour / Paint System: | white hull two component system (2017) white superstructure |
RCD / CE Certification: | C |
Suitable for / as: | recreational vessel inland waterways |
Additional information: | motor cruiser AC spacious aftdeck straight hull cruiser Great vessel for cruising on the European canals and rivers. Great vessel for cruising on the French canals and rivers. |
Technical information
Enginepower: | 91 Hp 67 kW |
Engine brand: | Perkins |
Engine model: | M92 |
Number of cylinders: | 4 |
Construction year engine: | 2001 |
Running hours (approx.): | 2200 |
Fuel: | diesel |
Fuel tank (approx.): | 1x 350 ltr stainless steel tank(s) |
Cooling system: | intercooling wet exhaust |
Propulsion: | 4 blade propeller water lubricated propeller shaft |
Gearbox: | mechanical |
Heating: | Webasto hot air heating on diesel |
Engine instruments: | present |
Bow thruster: | Cupa electric bow thruster 24 Volt (2017) |
Electricity system: | 12 / 230 Volt 230 Volt shore power connection |
Batteries: | 2x 180 Amp bow thruster batterie(s) (2017) 1x starter batterie(s) 1x domestic batterie(s) |
Battery charger: | Mobitronic battery charger 12/25 |
Battery isolator: | battery isolator |
Genny: | 750 Watt petrol (gasoline) |
Inverter: | 1500 Watt |
Fresh water tank (approx.): | 1x 250 ltr stainless steel tank(s) |
Water pressure system: | electric water pump |
Hot water system: | 40 ltr boiler/water calorifier via 230 Volt and engine cooling system |
Holding tank (approx.): | 1x 150 ltr steel tank(s) |
Diesel waterseparator: | present |
Bilge pump: | electric pump |
Gas system: | present |
Accommodation
Interior: | teak finish |
Cabins: | 2 cabins |
Berth: | owners cabin: 1x 2-pers V-bunk: 2x 1-pers |
Lay-out plan (not to scale): | see attachment |
Bathroom: | washbasin with hot & cold running water hand shower in 1 area together with the toilet |
Toilet / Heads: | hand pumptoilet washbasin with hot & cold running water |
Galley: | along ships |
Cooker: | 4-burner hob stainless steel on gas |
Oven: | electric oven |
Fridge / Refrigerator: | present |
Freezer: | small ice compartment |
Worktop: | plastic worktop |
Washbasin: | stainless steel sink |
Water tap: | mixer tap with hot & cold running water |
Entertainment: | radio/CD player |
Headroom (approx.): | forward (approx.) 1, 85 m midships (approx.) 1,87 / 1,91 m toilet (approx.) 1,79 m aft (approx.) 1,86 m |
Additional information: | well maintained see photographs |
Navigation equipment
Navigation equipment: | Raytheon depth / echosounder Navman 7100 VHF with DSC 2x window wiper navigation lights hour counter |
Equipment
Anchor equipment: | Vetus manual anchor winch warping drum anchor chain Stainless steel hawsehole Pool anchor Stainless steel bow plate |
Cabriocap: | cabriocap |
Boarding ladder: | present |
Swimming platform: | present |
Searail / Pulpit: | stainless steel searail |
Safety: | 2x fire extinguisher life buoy |
Additional information: | aluminium gangway stainless steel fender holder |